| 螺杆泵定子内螺旋曲面铣削指状铣刀的有限元分析 |
| |
| 引用本文： | 王可,王贺,孙兴伟,唐春光. 螺杆泵定子内螺旋曲面铣削指状铣刀的有限元分析[J]. 压缩机技术, 2011, 0(6): 10-12 |
| |
| 作者姓名： | 王可 王贺 孙兴伟 唐春光 |
| |
| 作者单位： | 1. 沈阳工业大学机械工程学院,辽宁沈阳,110870
2. 山东省安丘市城市供排水管理处,山东安丘,262106 |
| |
| 摘 要： | 应用有限元方法,分析指状铣刀在铣削内螺旋曲面的情况下,刀具的内部应力、变形及其在随加工参数每齿进给量变化而变化的规律,并对指状铣刀的模态进行分析,为减少指状铣刀在加工过程中的非正常磨损现象,提高指状铣刀寿命,提供了优化方案,为优化加工工艺参数提供参考.
|
| 关 键 词： | 内螺旋曲面 指状铣刀 有限元方法 最大等效应力 最大变形 每齿进给量 |
Finite Element Analysis of Finger Cutter for Inner Spiral Surface of Screw Pump Stator |
| |
| WANG Ke , WANG He , SUN Xing-wei , TANG Chun-guang. Finite Element Analysis of Finger Cutter for Inner Spiral Surface of Screw Pump Stator[J]. Compressor Technology, 2011, 0(6): 10-12 |
| |
| Authors: | WANG Ke WANG He SUN Xing-wei TANG Chun-guang |
| |
| Affiliation: | 1. College of Mechanical Engineering, Shenyang University of Technology, Shenyang 110870, China; 2. City Water Supply and Drainage Management Office of Anqiu City of Shandong Province, Shandong 262106, China) |
| |
| Abstract: | In this paper, the finite element method is used to analyze the finger cutter＇s inner stress, deformation, the changing rule with the processing parameters of feed per tooth and the modal of the finger cutter in the case of milling inner spiral surface. In conclusion, the study supplies a optimization program for reducing the finger cutter＇s abnormal breakage during processing and improving using life of finger cutter. Additionally,it also provides a reference for the optimal processing parameter. |
| |
| Keywords: | inner spiral surface finger cutter finite element method maximum equivalent stress maximum distortion feed per tooth |
| 本文献已被 维普 万方数据 等数据库收录！ |
|
