| 低压铸造铝合金发动机缸盖气体泄漏的原因分析 |
| |
| 引用本文： | 邹纯,赵海东,何韶,胡志伟,陈海强,周军航.低压铸造铝合金发动机缸盖气体泄漏的原因分析[J].特种铸造及有色合金,2012,32(5):443-446. |
| |
| 作者姓名： | 邹纯 赵海东 何韶 胡志伟 陈海强 周军航 |
| |
| 作者单位： | 1. 华南理工大学国家金属材料近净成形工程技术研究中心
2. 广东肇庆动力技研有限公司 |
| |
| 基金项目： | 国家科技支撑计划资助项目，广东省教育部产学研结合资助项目，QUALICA-SCUT铸造CAE联合研发中心资助项目 |
| |
| 摘 要： | 针对低压铸造生产的铝合金发动机缸盖在气密性检测中发现的泄漏问题,采用金相显微镜、扫描电子显微镜和能谱等手段研究了泄漏部位的组织与缺陷,并与相应的正常位置显微组织进行了对比分析。结果表明,枝晶间显微缩孔是导致缸盖泄漏的主要原因;而氧化夹杂物和异常生长的块状Si相增大了缸盖铸件在凝固过程中缩孔产生的倾向。
|
| 关 键 词： | 铝合金缸盖 气体泄漏 微观组织 收缩缺陷 |
Origination of the Gas Leakage in Low Pressure Die Cast Aluminum Alloy Cylinder Head for Engine |
| |
| ZOU Chun
,
Zhao Haidong
,
He Shao
,
Hu Zhiwei
,
Chen Haiqiang
,
Zhou Junhang.Origination of the Gas Leakage in Low Pressure Die Cast Aluminum Alloy Cylinder Head for Engine[J].Special Casting & Nonferrous Alloys,2012,32(5):443-446. |
| |
| Authors: | ZOU Chun Zhao Haidong He Shao Hu Zhiwei Chen Haiqiang Zhou Junhang |
| |
| Affiliation: | 1.National Engineering Research Center of Near-net-shape Forming for Metallic Materials,SouthChina University of Technology;2.Guangdong Zhaoqing Power Technology Research Co.Ltd.) |
| |
| Abstract: | There exists leakage in low pressure casting aluminum alloy cylinder head for engine during gas tight testing.The microstructure and defects mechanism of the gas leakage position were investigated by OM(optical microscope),SEM(scanning electron microscope),EDS(energy dispersive spectrometer),and it was compared with that of the sound part.The results reveal that interdendritic shrinkage porosities are responsible for the leakage of cylinder head.Meanwhile,the oxide inclusions and abnormal growth block-shaped Si phase promote the tendency of shrinkage porosity formation during the casting solidification process. |
| |
| Keywords: | Aluminum Alloy Cylinder Head Gas Leakage Microstructure Shrinkage Porosity |
| 本文献已被 CNKI 万方数据 等数据库收录！ |
