| A356铝合金轮毂半固态挤压铸造成形数值模拟 |
| |
| 引用本文： | 张帆,徐骏,张志峰,刘建朝,李豹.A356铝合金轮毂半固态挤压铸造成形数值模拟[J].特种铸造及有色合金,2012,32(5):422-425. |
| |
| 作者姓名： | 张帆 徐骏 张志峰 刘建朝 李豹 |
| |
| 作者单位： | 北京有色金属研究总院先进控制凝固与加工成型工程技术研究中心 |
| |
| 基金项目： | 国家高技术研究发展计划(863计划)资助项目，国家重点基础研究发展计划(973计划)资助项目 |
| |
| 摘 要： | 通过建立A356铝合金的半固态表观粘度模型,采用计算机模拟方法对A356铝合金轮毂半固态挤压铸造成形工艺进行了研究.通过分析挤压速度、半固态浆料充填温度及模具预热温度对铝合金轮毂半固态成形性能的影响,探讨了不同条件下的金属流动特点和温度分布规律.结果表明,对该尺寸铝合金轮毂的最佳成形工艺:半固态浆料充填温度为600℃,模具预热温度为300℃,挤压速度为5 mm/s,保压时间为25 s.
|
| 关 键 词： | A356铝合金 半固态挤压铸造 数值模拟 表观粘度模型 |
Numerical Simulation of Semi-Solid Die-Forging Forming A356 Aluminum Alloy Wheel |
| |
| Zhang Fan
,
Xu Jun
,
Zhang Zhifeng
,
Liu Jianchao
,
Li Bao.Numerical Simulation of Semi-Solid Die-Forging Forming A356 Aluminum Alloy Wheel[J].Special Casting & Nonferrous Alloys,2012,32(5):422-425. |
| |
| Authors: | Zhang Fan Xu Jun Zhang Zhifeng Liu Jianchao Li Bao |
| |
| Affiliation: | (Advanced Cast and Processing Engineering Centre,General Research Institute for Nonferrous Metals) |
| |
| Abstract: | The semi-solid die-forging forming process of A356 alloy was visualized by numerical simulation based on semi-solid A356 alloy apparent viscosity model.The characteristics of melt flow and temperature distribution was presented by analyzing the effects of extruding speed,semi-solid slurry temperature and mould preheating temperature on performance of semi-solid forming aluminum alloy wheel.The results show that the optimized forming parameters of the alloy wheels are as follows:the semi-solid slurry temperature of 600 ℃,and the mould preheating temperature of 300 ℃,the extruding speed of 5 mm/s.Meanwhile,the holding time is 25 s. |
| |
| Keywords: | A356 Aluminum Alloy Semi-Solid Forging Numerical Simulation Apparent Viscosity Model |
| 本文献已被 CNKI 万方数据 等数据库收录！ |
