干预作业下深水气井井筒水合物沉积规律研究

了解水合物沉积规律，可为深水气井干预作业方案优化及井筒内水合物防治提供思路。在气液两相流动模型的基础上，结合干预作业工具下放引起的热量交换和摩阻梯度变化，建立了干预作业下井筒压力和温度预测模型，采用迭代法对温度和压力模型耦合求解。基于水合物生长动力学模型，结合井筒温度和压力预测结果，建立水合物沉积模型，分析了干预作业下井筒内水合物沉积规律。结果表明，产量的增加导致井筒内压差升高，高产量下泥线处井筒温度较高；随着干预作业工具的下放，井筒内压力升高，但压力升高幅度逐渐减小，井口处压力的最大升高幅度约为3.0 MPa；干预作业工具直径占比小于50%时，干预作业工具直径越大，井筒压力越高；井筒泥线位置是水合物沉积堵塞高风险区域，低产井的水合物沉积速度比高产井的水合物沉积速度快；干预作业工具下放至泥线附近时井筒水合物沉积速度最快，干预作业工具直径占比50%时井筒水合物沉积速度较快。

Study of Hydrate Deposition Pattern in Deepwater Gas Wellbore under Intervention Operation

Understanding the hydrate deposition law can provide ideas for the optimization of intervention operation plans and the prevention and control of hydrate in the wellbore of deepwater gas wells. On the basis of the gas?liquid two?phase flow model, a wellbore pressure and temperature prediction model was developed based on the heat exchange and frictional gradient changes caused by the lowering of the intervention tool, and the temperature and pressure models were coupled to solve by the iterative method. Based on the hydrate growth kinetic model, combined with the wellbore temperature and pressure prediction results, a hydrate deposition model was established, and the hydrate deposition law in the wellbore under intervention operations was analyzed. The results showed that the increase of production led to the increase of pressure difference in the wellbore and the higher wellbore temperature at the mudline under high production. With the release of the intervention tool, the pressure in the wellbore increases, but the pressure increase gradually decreases, and the maximum pressure increase at the wellhead is about 3.0 MPa. When the proportion of the intervention tool diameter is less than 50%, the larger the tool diameter, the higher the wellbore pressure. The location of the wellbore mudline is a high?risk area for hydrate deposition plugging, and the rate of hydrate deposition in low?producing wells is faster than that in high?producing wells. The wellbore hydrate deposition rate is the fastest when the intervention tool is placed near the mudline, and the wellbore hydrate deposition rate is faster when the intervention tool diameter accounts for 50%.