| 基于正交试验的某外饰件工艺参数优化及质量评定 |
| |
| 引用本文： | 储成生,葛君廷,马勇. 基于正交试验的某外饰件工艺参数优化及质量评定[J]. 中国塑料, 2013, 27(7): 90-93. DOI: 10.19491/j.issn.1001-9278.2013.07.020 |
| |
| 作者姓名： | 储成生 葛君廷 马勇 |
| |
| 作者单位： | 尼普洛医疗器械(合肥)有限公司 |
| |
| 基金项目： | 安徽省自然科学基金资助项目(1308085QE72) |
| |
| 摘 要： | 某型号DVD刻录机外门为外饰薄壁塑料制件，在装配及外观质量上都有较高要求。本文应用CAE技术，设计了最佳浇口位置；针对翘曲变形，基于正交试验法，通过综合平衡法分析获得最优的工艺参数组合，并进行了质量评定与实验验证，本研究为实际大批量生产提供了理论依据与技术支持。
|
| 关 键 词： | 注射成型 工艺参数 有限元分析 翘曲 正交试验 |
| 收稿时间： | 2013-03-25 |
Optimization of Injection Molding Process and Quality Evaluation for Some Outer Decoration Parts Based on Orthogonal Test Method |
| |
| CHU Chengsheng;GE Junting;MA Yong. Optimization of Injection Molding Process and Quality Evaluation for Some Outer Decoration Parts Based on Orthogonal Test Method[J]. China Plastics, 2013, 27(7): 90-93. DOI: 10.19491/j.issn.1001-9278.2013.07.020 |
| |
| Authors: | CHU Chengsheng GE Junting MA Yong |
| |
| Affiliation: | CHU Chengsheng;GE Junting;MA Yong;Nipro Medical(Hefei)Co,Ltd;China Hualu Panasonic AVC Networks Co,Ltd;School of Materials Science and Engineering,Hefei University of Technology; |
| |
| Abstract: | The studied outer door is a plastic production with thin for the outer decoration of the certain type DVD disc recorder. And there are the higher requirements of assemble, appearance and so on. According to the warpage of part in the practical production, combining with orthogonal experiment method and CAE technology, the process parameters are optimized and the optimal combinations of process parameters are achieved by the integrated balance method. Especially, under this process, the qualified product can be obtained through the experimental verification. The research may provide a theoretical basis and technical support to the practical mass production. |
| |
| Keywords: | |
| 本文献已被 CNKI 等数据库收录！ |
| 点击此处可从《中国塑料》浏览原始摘要信息 |
|
点击此处可从《中国塑料》下载全文 |
