首页 | 本学科首页   官方微博 | 高级检索  
     

硅橡胶复合材料的制备及摩擦性能
引用本文:赵连想,吴友平.硅橡胶复合材料的制备及摩擦性能[J].合成橡胶工业,2022,0(2):106-111.
作者姓名:赵连想  吴友平
作者单位:北京化工大学 北京市先进弹性体工程技术研究中心/材料科学与工程学院, 北京 100029
摘    要:考察了白炭黑、羟基硅油对硅橡胶复合材料摩擦性能的影响,研究了硅橡胶复合材料在干、湿光滑玻璃表面摩擦系数的影响因素及摩擦机理.结果表明,硅橡胶复合材料在光滑玻璃表面的干摩擦系数(fD)与损耗因子(tanδ)/邵尔A硬度(H)、tanδ/剪切储能模量(G')均呈线性正相关,随白炭黑用量的增加,fD降低.当增塑剂用量小于7....

关 键 词:硅橡胶  干摩擦  湿摩擦  白炭黑  羟基硅油  剪切模量  损耗因子

Preparation and friction properties of silicone rubber composites
ZHAO Lian-xiang,WU You-ping.Preparation and friction properties of silicone rubber composites[J].China Synthetic Rubber Industry,2022,0(2):106-111.
Authors:ZHAO Lian-xiang  WU You-ping
Affiliation:Beijing Advanced Elastomer Engineering Technology Research Center/School of Materials Science and Engineering, Beijing University of Chemical Technology, Beijing 100029, China
Abstract:Effects of silica and hydroxyl silicone oil on the friction properties of silicone rubber composites were investigated, and the influencing factors and friction mechanism of silicone rubber composites on dry and wet smooth glass surfaces were studied. The results showed that the dry friction coefficient (fD) of silicone rubber composites on smooth glass surfaces was linearly positive with loss factor (tan δ)/Shore A hardness (H), tan δ/shear storage modulus (G′), fD decreased with increasing silica amount. When the amount of plasticizer was less than 7.5 phr and H was no less than 34, fD of the silicone rubber composite had a linear positive correlation with tan δ/H and tan δ/G′. When the amount of plasticizer was no less than 7.5 phr and H was less than 34, the tan δ at a maximum strain of 42% had a linear positive correlation with fD. On a water-lubricated smooth glass surface, the wet friction coefficient of silicone rubber composites was positively correlated with tan δ.
Keywords:-
点击此处可从《合成橡胶工业》浏览原始摘要信息
点击此处可从《合成橡胶工业》下载全文
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号