| 基于Adams的剪式稳定架刚柔耦合分析 |
| |
| 引用本文： | 朴永灿,黄大巍,韩忠田,于广利,李天. 基于Adams的剪式稳定架刚柔耦合分析[J]. 计算机辅助工程, 2019, 28(3): 66-69 |
| |
| 作者姓名： | 朴永灿 黄大巍 韩忠田 于广利 李天 |
| |
| 作者单位： | 机械工业第九研究设计院有限公司,长春,130011;英特工程仿真技术(大连)有限公司,辽宁大连,116023 |
| |
| 摘 要： | 采用CATIA对剪式稳定架系统进行三维建模，基于ANSYS和Adams建立刚柔耦合动力学模型。考虑剪式稳定架的柔性特征，对刚柔耦合模型升降过程的3种工况进行动力学仿真分析，得到运动过程中剪式稳定架应力分布规律、连接铰点力和接触力。分析方法和结论可指导剪式稳定架的设计。
|
| 关 键 词： | 剪式稳定架 刚柔耦合 Adams 动力学仿真 |
| 收稿时间： | 2019-06-28 |
| 修稿时间： | 2019-07-08 |
Rigid-flexiable coupling analysis of scissor stabilizer based on Adams |
| |
| PIAO Yongcan,HUANG Dawei,HAN Zhongtian,YU Guangli and LI Tian. Rigid-flexiable coupling analysis of scissor stabilizer based on Adams[J]. Computer Aided Engineering, 2019, 28(3): 66-69 |
| |
| Authors: | PIAO Yongcan HUANG Dawei HAN Zhongtian YU Guangli LI Tian |
| |
| Abstract: | The three dimensional structural modeling of scissors stabilizer is built by CATIA. The rigid flexible coupling model is established based on ANSYS and Adams. The dynamic simulation analysis of rigid flexible coupling model on three lifting conditions is carried out considering the flexibility of scissors stabilizer. The stress distribution regular, joint force and contact force of scissors stabilizer are obtained. The analysis method and conclusion can guide the design of scissors stabilizer. |
| |
| Keywords: | scissors stabilizer rigid flexiable coupling Adams dynamic simulation |
| 本文献已被 万方数据 等数据库收录！ |
| 点击此处可从《计算机辅助工程》浏览原始摘要信息 |
|
点击此处可从《计算机辅助工程》下载全文 |
|
