首页 | 本学科首页   官方微博 | 高级检索  
     

有源控制中通路建模模型研究
引用本文:王进军,陈克安,闫靓.有源控制中通路建模模型研究[J].电声技术,2005(10):60-62,65.
作者姓名:王进军  陈克安  闫靓
作者单位:西北工业大学,航海学院环境工程系,陕西,西安,710072
摘    要:在有源控制通路建模或有源控制实现过程中,与FIR滤波器相比,虽然IIR滤波器具有诸多优点,但由于其对系统稳定性的不利影响及其工程实现的不易性,在实际通路建模时,更多地是使用FIR滤波器模型。重点研究使用FIR滤波器对包含零极点的通路传递函数进行建模时,传递函数极点位置变化对滤波器长度的影响以及极点个数对滤波器长度的影响。

关 键 词:通路建模  FIR滤波器  IIR滤波器
文章编号:1002-8684(2005)10-0060-03
收稿时间:2005-04-23
修稿时间:2005-04-23

Studies on Path Modeling of Active Control
WANG Jin-jun,CHEN Ke-an,YAN Liang.Studies on Path Modeling of Active Control[J].Audio Engineering,2005(10):60-62,65.
Authors:WANG Jin-jun  CHEN Ke-an  YAN Liang
Abstract:Upon comparing the performance levels for FIR and IIR models in the path modeling of AC (Active Control),people use the FIR models in most cases although IIR models have more advantages than FIR models,as IIR models have some disadvantages to the stabilities and it's is not easy to the realization of AC. In this paper,effect of the location of poles on the length of FIR filter is studied when using FIR models in the path modeling.
Keywords:path modeling  FIR filter  IIR filter
本文献已被 CNKI 维普 万方数据 等数据库收录!
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号