首页 | 本学科首页   官方微博 | 高级检索  
     

变形量和变形后保温时间对Q235钢形变诱导铁素体逆相变的影响
引用本文:王倩,杨忠民,吴春京. 变形量和变形后保温时间对Q235钢形变诱导铁素体逆相变的影响[J]. 机械工程材料, 2009, 33(2): 12-15
作者姓名:王倩  杨忠民  吴春京
作者单位:北京科技大学材料科学与工程学院,北京100083;钢铁研究总院结构材料研究所,北京100081;钢铁研究总院结构材料研究所,北京,100081;北京科技大学材料科学与工程学院,北京,100083
基金项目:国家高技术研究发展计划(863计划) 
摘    要:通过对Q235钢在Gleeble1500热模拟试验机上压缩变形后保温不同时间的显微组织进行观察,研究了变形量和变形后保温时间对形变诱导铁素体向奥氏体逆相变的影响.结果表明:在相同温度和相同变形速率下,随着变形量的增加,发生形变诱导铁素体逆相变的时间逐渐变短;同时随着保温时间的延长,铁素体的含量出现由多到少、再到多的变化趋势,而且铁索体出现了两种不同原因导致的晶粒长大.

关 键 词:形变诱导铁素体  逆相变  Q235钢

Effect of Deformation and Holding Time after Deformation on Inverse Transformation of Deformation Induced Ferrite in Q235 Steel
WANG Qian,,YANG Zhong-min,WU Chun-jing. Effect of Deformation and Holding Time after Deformation on Inverse Transformation of Deformation Induced Ferrite in Q235 Steel[J]. Materials For Mechanical Engineering, 2009, 33(2): 12-15
Authors:WANG Qian    YANG Zhong-min  WU Chun-jing
Affiliation:1.University of Science and Technology Beijing;Beijing 100083;China;2.Central Iron and Steel Research Institute;Beijing 100081;China
Abstract:The influence of deformation and holding time on the inverse transformation phenomenon of deformation induced ferrite in Q235 steel was investigated by observation of microstructure of the specimen which experienced a hot compression process on Gleeble1500 thermomechanical simulator.The results indicated that the speed for inverse transformation of deformation induced ferrite increased with the increase of strain at the same temperature and strain rate.The ferrite content decreased first and then increased ...
Keywords:deformation induced ferrite  inverse transformation  Q235 steel  
本文献已被 CNKI 万方数据 等数据库收录!
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号