| 瓶盖注射模设计 |
| |
| 引用本文： | 刘晓宁,张永俊.瓶盖注射模设计[J].模具工业,2006,32(5):44-46. |
| |
| 作者姓名： | 刘晓宁 张永俊 |
| |
| 作者单位： | 广东工业大学,机电学院,广东,广州,510090;广东工业大学,机电学院,广东,广州,510090 |
| |
| 摘 要： | 介绍了一种结构新颖的旅行杯瓶盖的结构特点、成型工艺及瓶盖注射模的侧抽芯和内螺纹结构,最后叙述了瓶盖注射模设计的要点及模具的工作过程。
|
| 关 键 词： | 瓶盖 注射模 螺纹 侧抽芯 |
| 文章编号： | 1001-2168(2006)05-0044-03 |
| 收稿时间： | 10 8 2005 12:00AM |
| 修稿时间： | 2005年10月8日 |
Design of injection mould for bottle cap |
| |
| LIU Xiao-ning,ZHANG Yong-jun.Design of injection mould for bottle cap[J].Die & Mould Industry,2006,32(5):44-46. |
| |
| Authors: | LIU Xiao-ning ZHANG Yong-jun |
| |
| Affiliation: | School of Mechanical and Electrical Engineering, Guangdong University of Technology, Guangzhou, Guangdong 510090, China |
| |
| Abstract: | A new kind of traveling cup bottle cap was introduced. The structural feature of the cap, the forming technology and the mechanism of side core-pulling and internal screw thread were analyzed. Then the key points in designing the injection mould and the working Process were presented. |
| |
| Keywords: | bottle cap injection mould screw thread side core-pulling |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
