| 基于电火花成形的联接套加工工艺及其工装设计 |
| |
| 引用本文： | 王兴芳,恽达明. 基于电火花成形的联接套加工工艺及其工装设计[J]. 煤矿机械, 2009, 30(11) |
| |
| 作者姓名： | 王兴芳 恽达明 |
| |
| 作者单位： | 常州轻工职业技术学院,江苏,常州,213164 |
| |
| 摘 要： | 对联接套工件结构及其加工工艺进行了分析,明确其加工难点为斜小孔的加工,针对难点优化加工工艺,并设计了电火花成形工装,取得了良好的加工效果。
|
| 关 键 词： | 联接套 斜小孔 加工工艺设计 电火花成形加工工装设计 |
Design on Joining Sleeve Machining Crafts and Fixture Based on EDM Forming |
| |
| WANG Xing-fang,YUN Da-ming. Design on Joining Sleeve Machining Crafts and Fixture Based on EDM Forming[J]. Coal Mine Machinery, 2009, 30(11) |
| |
| Authors: | WANG Xing-fang YUN Da-ming |
| |
| Abstract: | On the basis of analyzing the crafts and structural characteristics of the joining sleeve,the difficult is the craft of inclined and small hole.The craft technology is optimized,and the fixture of the EDM forming is designed,which gets good results. |
| |
| Keywords: | joining sleeve inclined and small hole craft analysis fixture of the EDM forming |
| 本文献已被 万方数据 等数据库收录！ |
|
