| 基于ARM的FDM控制系统 |
| |
| 引用本文： | 张军伟,叶春生,莫建华,张鸿平. 基于ARM的FDM控制系统[J]. 仪表技术与传感器, 2011, 0(1) |
| |
| 作者姓名： | 张军伟 叶春生 莫建华 张鸿平 |
| |
| 作者单位： | 华中科技大学材料成形及模具技术国家重点实验室,湖北,武汉,430074 |
| |
| 摘 要： | 文中就FDM快速成型技术提出一套基于ARM控制器的嵌入式、模块化、网络化控制系统.FDM控制系统由主控模块、运动模块、温控模块和送丝模块四大模块组成,各个模块都带有独立的CAN总线通讯模块,增强了系统的独立性和可移植性.另提出基于标准数控代码的加工模式,从而建立1个成本低、性能高、稳定可靠和易于组态复杂控制系统.
|
| 关 键 词： | 嵌入式 控制系统 快速成型 CAN总线 数控代码 |
Control System of Fused Deposition Modeling System Based on ARM Cortex |
| |
| ZHANG Jun-wei,YE Chun-sheng,MO JIAN-hua,ZHANG Hong-ping. Control System of Fused Deposition Modeling System Based on ARM Cortex[J]. Instrument Technique and Sensor, 2011, 0(1) |
| |
| Authors: | ZHANG Jun-wei YE Chun-sheng MO JIAN-hua ZHANG Hong-ping |
| |
| Affiliation: | ZHANG Jun-wei,YE Chun-sheng,MO JIAN-hua,ZHANG Hong-ping(State Key Laboratory of Material Process and Die and Mould Technology,Huazhong University of Science and Technology,Wuhan 430074,China) |
| |
| Abstract: | According to the requirement of rapid prototyping,this paper presented an embedding,modularizing and network control system solution based on ARM controller.The system consists of four sub-functions,which are master control block,movement control block,tempratrue control block and nozzle control block.Communicating via CAN bus,all the sub-function modules are more independent and transplantable.Additional,manufacture based on standard numerical control codes is larruping approach.The system is low-cost,high... |
| |
| Keywords: | FDM |
| 本文献已被 CNKI 万方数据 等数据库收录！ |
|
