首页 | 本学科首页   官方微博 | 高级检索  
     

自动金丝球焊工艺中第一键合点成球缺陷分析
引用本文:王姜伙,金家富. 自动金丝球焊工艺中第一键合点成球缺陷分析[J]. 电子与封装, 2014, 0(2): 13-15
作者姓名:王姜伙  金家富
作者单位:中国电子科技集团公司第38研究所,合肥230088
基金项目:装备预先研究项目(51318070119)
摘    要:引线键合在多芯片微波组件微组装上应用广泛,通常会用金丝实现芯片与基板、基板与基板间的互连。自动金丝球焊是互连方法的一种,它具有生产效率高、一致性好的特点。文章针对在生产过程中出现的第一键合点成球缺陷展开原因分析,即键合工艺参数不当、真空系统故障和线夹间距不当等。系列试验验证,线夹间隙不当可造成上述缺陷,解决该问题的办法是将线夹间隙调整到0.05 mm。

关 键 词:自动金丝球焊  成球缺陷  线夹

The Analysis of First Bonding Defects in Automatic Gold Ball Bonding
WANG Jianghuo,JIN Jiafu. The Analysis of First Bonding Defects in Automatic Gold Ball Bonding[J]. Electronics & Packaging, 2014, 0(2): 13-15
Authors:WANG Jianghuo  JIN Jiafu
Affiliation:(China Electronics Technology Group Corporation No.38 Research Institute, Hefei 230088, China)
Abstract:Wire bonding process is widely used in microwave multi-chip module for joining chip to substrate or substrate to substrate with gold wire. As one of connecting methods, automatic gold ball bonding has high production efficiency and good consensus. In order to solve first bonding defects in automatic gold ball bonding, this article expands the reason analysis, which includes the wrong settings of bolding parameters, failure of vacuum system, false space between wire clamps. Series experiments indicate that false space between wire clamps may cause the defects. Adjusting the space to 0.05 mm is a good way to solve this problem.
Keywords:automatic gold ball bonding  bonding defects  wire clamps
本文献已被 CNKI 维普 等数据库收录!
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号