| 孔挤压强化和工艺参数研究 |
| |
| 引用本文： | 张洪双,段晓飞. 孔挤压强化和工艺参数研究[J]. 机械设计与制造, 2011, 0(11) |
| |
| 作者姓名： | 张洪双 段晓飞 |
| |
| 作者单位： | 1. 河海大学机电工程学院,常州,213022
2. 安阳工学院机械工程学院,安阳,455000 |
| |
| 摘 要： | 孔挤压强化可以显著提高机械连接的疲劳强度。采用有限元方法建立了孔挤压强化轴对称模型,得到了孔壁残余应力分布状态,建立了孔壁残余应力和孔径、板件厚度、挤压强化过盈量等工艺参数之间的关系曲线。结果表明,周向残余应力和孔径、挤压强化过盈量之间为对数关系,和板件厚度之间为线性关系;径向残余应力和孔径、挤压强化过盈量之间为对数关系,和板厚(以2.5mm为分界线)之间为线性关系,为孔挤压强化效果的定量化认识奠定了基础。
|
| 关 键 词： | 孔挤压强化 残余应力 工艺参数 应力曲线 有限元 |
Research of hole expansion residual stress and process parameters |
| |
| ZHANG Hong-shuang,DUAN Xiao-fei. Research of hole expansion residual stress and process parameters[J]. Machinery Design & Manufacture, 2011, 0(11) |
| |
| Authors: | ZHANG Hong-shuang DUAN Xiao-fei |
| |
| Affiliation: | ZHANG Hong-shuang1,DUAN Xiao-fei2(1Mechanical and Electrical Engineering College,Hohai University,Changzhou 213022,China)(2Mechanical Engineering College,Anyang Institute of Technology,Anyang 455000,China) |
| |
| Abstract: | The hole expansion process is a well-known technique used to improve the fatigue life in mechanical linkage.An axial symmetry model of expansion hole was established with finite element method to obtain residual stress distributing status at the hole wall so that the relation curve between the residual stress and the hole diameter,the plate thickness,cold expansion ratio was drawn.The results show the relationship between radial residual stress and hole diameters,hole expansion ratio were logarithmic;relati... |
| |
| Keywords: | Hole expansion Residual stress Process parameter Stress curve FEM |
| 本文献已被 CNKI 万方数据 等数据库收录！ |
|
