Probability Model for the intermolecular force with surface roughness considered |
| |
Authors: | Wei Hua Bo Liu Shengkai Yu Weidong Zhou |
| |
Affiliation: | aData Storage Institute, 5 Engineering Drive 1, Off Kent Ridge Crescent, Singapore 117608, Singapore |
| |
Abstract: | This paper studies the intermolecular force considering both the roughness of the air-bearing surface and the disk surface by simulation. A model is developed to deal with the intermolecular force, the contact force and the air-bearing force based on the probability distributions of the roughness of the surfaces. The intermolecular force is linked with the contact force when its repulsive term is stronger than its attractive term. In such a case, all the intermolecular force, the contact force and the air-bearing force can be extended to the various flying height regions. Some interesting results are observed and discussed. It is found that both the Hamaker constant and the surface roughness have significant influences on the intermolecular pressure. Compared with the intermolecular pressure with smooth surfaces, that with the surface roughness considered shows greater attractive pressure at the flying height higher than 0.7 nm approximately, but much smaller values between 0.26 and 0.7 nm approximately. A negative stiffness region exists when the minimum flying height is between −0.2 and 1.2 nm for the case studied in this paper. It shows that the Probability Model is suitable for the intermolecular force calculation with the surface roughness considered. |
| |
Keywords: | Intermolecular force Surface roughness Probability Model Head/disk interface Hard disk drive |
本文献已被 ScienceDirect 等数据库收录! |
|