Abstract: | A series of blends has been prepared by adding a polyetherimide (PEI), in varying proportions, to a tetrafunctional epoxy resin, tetraglycidyl-diaminodiphenylmethane (TGDDM), cured with 4,4′-diaminodiphenylsulphone (DDS). All the materials exhibited two-phase morphologies which were characterised by dynamic mechanical thermal analysis and scanning electron microscopy. Addition of the thermoplastic gave a modest improvement in fracture properties (K1c and G1c), as determined by three-point bending experiments, although no obvious correlation with the marked morphological changes was observed. |