| Abstract: | The melting point, specific heat, and morphology and hydrostatically extruded polypropylene (PP) were studied to clarify the plastic deformation of three different parts of the extrudates (periphery, intermediate, and core) parallel to the direction of hydrostatic extrusion. Differential scanning calorimeter (DSC) measurements showed that, for all the parts studied, the peak and the end-of-transition, temperatures had a minimum value at a percentage reduction in area, R, of 50% Similar behavior was observed for the specific heat evaluated at several temperatures below the melting point. The morphological structure observed by use of a polarizing microscope indicated that the shape- of spherulites above R = 50% changed from spherulitic to elliptic. It is suggested that the pronounced changes taking place around R = 50% are closely related to the marked bend in the extrusion pressure versus extrusion ratio curve which takes place at the same R value. The molecular chains in the coarse spherulites appear to be deformed below R = 50% in such a way that finer spherulites are formed; but at R values above 50% the presence of elliptic spherulites implies that non-uniform deformation is present under higher hydrostatic pressure of extrusion. |
