| Abstract: | Uniaxial tension tests to the yield point were performed on poly(chlorotrifluoroethylene) (PCTFE) and poly(vinylidene fluoride) (PVF2) from room temperature to near the melting point at a strain rate of 2 min?1. At room temperature and at least two elevated temperatures, measurements were also made at strain rates from 0.02 to 8 min?1. The properties of these polymers were found to be similar to those of other semicrystalline polymers. In the absence of other transitions, yield energy was found to be a linear function of temperature extrapolating to zero near the melting temperature. The ratio of thermal to mechanical energy to produce yielding is smaller than for glassy polymers. Yield stress is a linear function of log strain rate. The ratio of yield stress to (initial) Young's modulus is about 0.03 at room temperature for both polymers. Yield stress is a linear function of unstrained volume. Yield strain, elastic, and plastic strain all initially increase with temperature, but PCTFE shows a decrease with temperature starting at about 100°C, thus behaving like a glassy amorphous polymer in this region. |
