| 偏摆锥差直齿锥齿轮副的轮齿加工新方法 |
| |
| 引用本文： | 易军,胡庆夕,杨乃积,胡来容.偏摆锥差直齿锥齿轮副的轮齿加工新方法[J].湖北工业大学学报,1995(3). |
| |
| 作者姓名： | 易军 胡庆夕 杨乃积 胡来容 |
| |
| 作者单位： | 华中理工大学，焦作工学院，湖北工学院机械工程系 |
| |
| 摘 要： | 从啮合原理出发，阐述了少齿差内锥齿轮副大轮采用成形刨削、小轮采用鼓形修正的刨齿方法．根据二阶齿面展成理论，引入轮位修正、床位和创刀横向调整，将小轮齿面修形，与大轮齿面实现失配啮合，有利于提高少齿差内锥齿轮副的齿面接触质量．
|
| 关 键 词： | 内锥齿轮副 少齿差 失配啮合 切齿原理 |
A New Method for Generation Straigth Bevel Gear with Few Teeth Difference in the Offset Swing Planetary Drive |
| |
| Yi Jun, Hu Qingxi, Yang Naiji, Hu Lairong.A New Method for Generation Straigth Bevel Gear with Few Teeth Difference in the Offset Swing Planetary Drive[J].Journal of Hubei University of Technology,1995(3). |
| |
| Authors: | Yi Jun Hu Qingxi Yang Naiji Hu Lairong |
| |
| Affiliation: | Yi Jun; Hu Qingxi; Yang Naiji; Hu Lairong |
| |
| Abstract: | In this article, based on the principle of engagement, the processing methods of internal bevel gear pairs are expounded, namely, the big gear is processed by the method of forming shapping and the small gear is processed growing corrdcting of tooth prfile. According to the second-order surface generation theory,the correction of the bevel gear's position, the horizontal adiustment of the machine tools position and planing cutter are cited so as to correct small gear profile, and then, the meshingperformance of the bevel gear pairs with few teeth difference is greatly improved. |
| |
| Keywords: | Internal straight bevel gear Few teeth difference Mismatched mesh The theory of gear cutting |
| 本文献已被 CNKI 等数据库收录！ |
|
