UG NX4在光学超精密车削加工中应用 |
| |
引用本文: | 王磊,张宇,贾丽刚,郭勤静.UG NX4在光学超精密车削加工中应用[J].工具技术,2008,42(5):42-44. |
| |
作者姓名: | 王磊 张宇 贾丽刚 郭勤静 |
| |
作者单位: | 昆明理工大学 |
| |
摘 要: | 针对光学超精密加工中数控程序的编写问题,采用UG NX4对实际的锗单晶零件进行建模,在其加工环境中,创建加工几何体,依据Tylor Ultra Form机床实际加工参数合理选择刀具,对车削的加工过程进行了三维动态仿真模拟,并生成刀具系统源文件,转换成机床可识别的数控加工程序,应用于机床车削出Φ38mm实际锗单晶零件,利用高精度轮廓仪进行加工后的面形测量,其表面粗糙度为0.1507μm,远远达到了实际生产要求。
|
关 键 词: | 超精密加工 锗单晶 UGNX4 仿真模拟 |
修稿时间: | 2007年5月1日 |
Research of Application on Optics Diamond Turning in Ultra-Precision Manufacturing Based on UG NX4 |
| |
Abstract: | The Aimed at the NC program problems in ultra-precision manufacturing,the 3D modle was established and the cutting process was simulated in UG NX4,the NC program,which was produced in machining simulation,was applied in optics diamond turning machine,also the pruduct,which material is germanium single crystal,was measured by contacting contour measurement instruments,the surface roghness is 0.1507μm. |
| |
Keywords: | Ultra-Precision Manufacturing germanium single crystal UG NX4 Simulation |
本文献已被 维普 万方数据 等数据库收录! |
|