| 800MPa级高强钢调质工艺的研究 |
| |
| 引用本文： | 段争涛,胡鑫,朱伏先,李艳梅.800MPa级高强钢调质工艺的研究[J].钢铁研究,2011,39(6):4-7. |
| |
| 作者姓名： | 段争涛 胡鑫 朱伏先 李艳梅 |
| |
| 作者单位： | 1. 东北大学轧制技术与连轧自动化国家重点实验室,辽宁沈阳,110819
2. 首钢京唐钢铁联合有限责任公司,河北唐山,063200 |
| |
| 摘 要： | 针对1种800MPa级高强钢的调质过程,分析了不同淬火温度和回火温度对实验钢力学性能和组织的影响。结果表明：淬火温度在880～920℃之间时,随着淬火温度升高,实验钢的强度逐渐降低,-40℃冲击韧性是先升高后降低,并在900℃达到最大;回火温度在550～700℃之间,随着回火温度的升高,实验钢的强度逐渐下降,-40℃冲...
|
| 关 键 词： | 高强钢 淬火 回火 力学性能 |
Study on quenching and tempering process of 800 MPa high strength steel plate |
| |
| DUAN Zheng-tao,HU Xin,ZHU Fu-xian,LI Yan-mei.Study on quenching and tempering process of 800 MPa high strength steel plate[J].Research on Iron and Steel,2011,39(6):4-7. |
| |
| Authors: | DUAN Zheng-tao HU Xin ZHU Fu-xian LI Yan-mei |
| |
| Affiliation: | DUAN Zheng-tao1,HU Xin2,ZHU Fu-xian1,LI Yan-mei1 (1.The State Key Laboratory of Rolling and Automation,Northeastern University,Shenyang 110819,China,2.Shougang Jingtang United Iron & Steel Co.Ltd.,Tangshan 063200,China) |
| |
| Abstract: | The quenching and tempering process of 800 MPa high strength low alloy steel was researched,the effect of different quenching and tempering temperatures on mechanical properties and microstucture of tested steel were analyzed.The results showed that when the quenching temperature was between 880 ℃ and 920 ℃,the strength decreased with the increase of quenching temperature,while the impact toughness at-40 ℃ increased first and then decreased and reached the maximum at 900 ℃.As the tempering temperature was between 550 ℃ and 700 ℃,the strength of tested steel decreased gradually while the impact toughness at-40℃ increased with the increase of tempering temperature.The tested steel quenched at 900 ℃ and then tempered at 600 ℃ has best mechanical properties. |
| |
| Keywords: | high strength steel quenching tempering mechanical property |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
|
