| 加工误差对齿廓重迭干涉的影响 |
| |
| 引用本文： | 杨锡和 石辉. 加工误差对齿廓重迭干涉的影响[J]. 雷达与对抗, 2001, 0(2): 46-49,65 |
| |
| 作者姓名： | 杨锡和 石辉 |
| |
| 作者单位： | 南京船舶雷达研究所!江苏南京210003 |
| |
| 摘 要： | 应用具体实例，研究了加工误差对少齿差内啮合齿廓重迭干涉的影响，并提出相应的解决方法。
|
| 关 键 词： | 加工误差 齿廓重迭干涉 齿差 啮合 |
Affect of Machining Error on the Tooth Outline Overlap Interference |
| |
| YANG Xi he,SHI Hui. Affect of Machining Error on the Tooth Outline Overlap Interference[J]. Radar & Ecm, 2001, 0(2): 46-49,65 |
| |
| Authors: | YANG Xi he SHI Hui |
| |
| Abstract: | The affect of machining error on the mesh inside of small tooth number difference of the tooth outline overlap interference is studied in this paper,with the application of practical examples,and the corresponding solving methods are given. |
| |
| Keywords: | machining error tooth outline overlap interference small tooth number difference mesh inside |
| 本文献已被 CNKI 维普 等数据库收录！ |
|
