| 换热器黄铜管与爆炸复合板焊接工艺的研究 |
| |
| 引用本文： | 赵爱彬. 换热器黄铜管与爆炸复合板焊接工艺的研究[J]. 压力容器, 2010, 27(5): 6-9. DOI: 10.3969/j.issn.1001-4837.2010.05.002 |
| |
| 作者姓名： | 赵爱彬 |
| |
| 作者单位： | 辽宁石油化工大学,机械工程学院,辽宁,抚顺,113001 |
| |
| 摘 要： | 采用手工氩弧焊的方法,研究了换热器HSn70-1B黄铜换热管与16Mn+HSn62-1复合板的焊接工艺。结果表明,通过工艺评定,所选用的焊接工艺是合适的,为黄铜的异种焊接提供了一个可行的试验方案。
|
| 关 键 词： | 黄铜热交换器 管-板焊接 手工氩弧焊 焊接工艺评定 |
Study on Welding Technology of Heat Exchange Brass Tube and Explosive Clad Plate |
| |
| ZHAO Ai-bin. Study on Welding Technology of Heat Exchange Brass Tube and Explosive Clad Plate[J]. Pressure Vessel Technology, 2010, 27(5): 6-9. DOI: 10.3969/j.issn.1001-4837.2010.05.002 |
| |
| Authors: | ZHAO Ai-bin |
| |
| Affiliation: | ZHAO Ai-bin(School of Mech.Eng.Liaoning Petroleum&Chemical Technology University,Fushun 113001,China) |
| |
| Abstract: | The welding technology of HSn70-1B brass heat exchange tube and 16Mn+HSn62-1 explosive clad plate by manual argon arc welding was studied.The results showed that welding technology being adopted was by welding procedure qualification.A feasible experimental scheme on dissimilar metal welding of brass was provided. |
| |
| Keywords: | brass heat exchanger tube-plate welding TIG welding welding procedure qualification |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
