| 电机转轴砂轮越程槽的设计 |
| |
| 引用本文： | 黄鹏程,周黎民. 电机转轴砂轮越程槽的设计[J]. 电机技术, 2012, 0(2): 60-61 |
| |
| 作者姓名： | 黄鹏程 周黎民 |
| |
| 作者单位： | 1. 南车株洲电机有限公司,412000
2. 北京交通大学,100044 |
| |
| 摘 要： | 采用有限元计算方法,对不同结构的计算数据进行对比,完成了1100kW异步风力发电机轴伸过渡位置应力集中处的计算过程。
|
| 关 键 词： | 电机 轴伸 应力 有限元法 |
Discussion of the Design of Motor Shaft Grinding Wheel Groove |
| |
| Huang Pengcheng , Zhou Liming. Discussion of the Design of Motor Shaft Grinding Wheel Groove[J]. Electrical Machinery Technology, 2012, 0(2): 60-61 |
| |
| Authors: | Huang Pengcheng Zhou Liming |
| |
| Affiliation: | Huang Pengcheng Zhou Liming CSR Electric Motor Co., LtdBeijing Jiaotong University |
| |
| Abstract: | Different calculated data of different con-struction was compared and analyzed by means of the finiteelement method and the calculation of the stress concern-ing position of elongation area on the shaft-extension of the1100kW wind turbine generator was done. |
| |
| Keywords: | Electric machine Shaft-extension Stress Finite element method |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
