首页 | 本学科首页   官方微博 | 高级检索  
     

一种宽带光谱响应特性的测量方法
引用本文:王成福,黄达诠,楼东武. 一种宽带光谱响应特性的测量方法[J]. 光电工程, 2002, 29(1): 39-51
作者姓名:王成福  黄达诠  楼东武
作者单位:1. 金华职业技术学院电子工程系,浙江,金华,321017
2. 浙江大学信电系,浙江,杭州,310027
基金项目:国防攻关资助项目(934-8-11)
摘    要:介绍了一种基于分束一步测量宽带(200nm-1750nm)光谱响应的方法。对该测量方法的基本构成、系统定标与校准、基本测量原理等问题均进行了详细分析。给出了实验测量结果,并与日本滨松公司的标准数据进行了对比,测量的平均绝对误差和平均相对误差分别为ε=1.37mA/W和εr=0.89%。理论分析与实验结果十分吻合。

关 键 词:光电探测器 光谱响应 测量方法 宽带
文章编号:1003-501X(2002)01-0048-04
收稿时间:2001-01-15
修稿时间:2001-01-15

A Method for Measuring Characteristics of Broadband Spectral Response
WANG Cheng-fu,HUANG Da-quan,LOU Dong-wu. A Method for Measuring Characteristics of Broadband Spectral Response[J]. Opto-Electronic Engineering, 2002, 29(1): 39-51
Authors:WANG Cheng-fu  HUANG Da-quan  LOU Dong-wu
Affiliation:WANG Cheng-fu1,HUANG Da-quan2,LOU Dong-wu2
Abstract:A broadband (200nm-1750nm) single-step spectral response method based on beam-splitting is introduced. The basic configuration, system scaling, calibration and the basic measuring principle of the measuring method are analyzed in detail. The measuring results are given and a comparison with the results of Hamamatsu Company in Japan is carried out. The average absolute error and average relative error of the measurement is e =1.37mA/W and e r =0.89%, respectively. The theoretical analysis coincides with the experimental results.
Keywords:Photo-electronic detectors  Spectral response  Measuring method  
本文献已被 CNKI 维普 万方数据 等数据库收录!
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号