首页 | 本学科首页   官方微博 | 高级检索  
     

乙烯基硅油改性苯丙乳液粘合剂的制备及应用
引用本文:杨少艳,赵振河,李辉. 乙烯基硅油改性苯丙乳液粘合剂的制备及应用[J]. 粘接, 2014, 0(6): 66-69,82
作者姓名:杨少艳  赵振河  李辉
作者单位:西安工程大学,陕西西安710048
基金项目:西安工程大学研究生创新基金资助项目(项目编号chx131106).
摘    要:采用丙烯酸酯单体制备苯丙乳液粘合剂,用乙烯基硅油对其进行改性。探讨了乙烯基硅油的用量对乳液性能、胶膜性能的影响,及硅油改性粘合剂的用量对棉织物印花性能的影响。对改性粘合剂进行了红外光谱、热重分析、透射电镜等表征。结果表明,乙烯基硅油用量为9%时,乳液外观、胶膜及印花性能较好;乙烯基硅油改性粘合剂用量为6%时,印花织物的手感柔软、摩擦牢度较好。

关 键 词:乙烯基硅油改性  粘合剂  印花  表征

Preparation and application of vinyl silicone modified styrene acrylic emulsion binder
YANG Shao-yan,ZHAO Zhen-he,LI Hui. Preparation and application of vinyl silicone modified styrene acrylic emulsion binder[J]. Adhesion in China, 2014, 0(6): 66-69,82
Authors:YANG Shao-yan  ZHAO Zhen-he  LI Hui
Affiliation:(School of Textile and Materials, Xi'an PolytechnicUniversity,Xi'an,Shaanxi 710048,China)
Abstract:The styrene acrylic emulsion binder was prepared with acrylate monomers and modified with vinyl silicone oil. The experiments explored the effect of vinyl silicone oil dosage on the properties of emulsion and emulsion film, and the effect of silicone modified binder on the printing properties of cotton fabrics.The modified binder was characterized by infrared spectrometry, thermo-gravimetric analysis, transmission electron microscopy.The results showed that when the amount of vinyl silicone oil is 9%, the emulsion appearance and the film performance are good;when the vinyl silicone oil modified binder amount is 6%,the printing fabric has a soft handfeel and the rubbing fastness is good.
Keywords:vinyl silicone oil modified  binder  printing  characterization
本文献已被 CNKI 维普 等数据库收录!
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号