| 铝合金电机壳低压砂型铸造工艺设计 |
| |
| 引用本文： | 金延竹,孙树臣,王文权,崔伟,冯海舟,黄海波,詹健. 铝合金电机壳低压砂型铸造工艺设计[J]. 铸造, 2022, 0(2): 198-202 |
| |
| 作者姓名： | 金延竹 孙树臣 王文权 崔伟 冯海舟 黄海波 詹健 |
| |
| 作者单位： | 一汽铸造有限公司;吉林大学材料科学与工程学院;迈格码（苏州）软件科技有限公司 |
| |
| 摘 要： | 以一款140 kW的铝合金水冷电机壳体做为研究对象,探讨了采用低压砂型工艺的电机壳的典型铸造工艺方案,并采用MAGMA软件进行工艺方案可行性的评估.结果表明,生产的电机壳体完全满足相关技术条件的要求.
|
| 关 键 词： | 铝合金电机壳 低压砂型铸造 工艺设计 MAGMA模拟 |
Process Design of Low Pressure Sand Casting for Aluminum Alloy Motor Shell |
| |
| JIN Yan-zhu,SUN Shu-chen,WANG Wen-quan,CUI Wei,FENG Hai-zhou,HUANG Hai-bo,ZHAN Jian. Process Design of Low Pressure Sand Casting for Aluminum Alloy Motor Shell[J]. China Foundry, 2022, 0(2): 198-202 |
| |
| Authors: | JIN Yan-zhu SUN Shu-chen WANG Wen-quan CUI Wei FENG Hai-zhou HUANG Hai-bo ZHAN Jian |
| |
| Affiliation: | (FAW Foundry Co.,Ltd.,Changchun 130013,Jilin,China;Key Laboratory of Automobile Materials,Ministry of Education and Department of Materials Science and Engineering,Jilin University,Changchun 130025,Jilin,China;MAGMA Engineering(Suzhou)Co.,Ltd.,Suzhou 215021,Jiangsu,China) |
| |
| Abstract: | Taking a 140 kW aluminum alloy water-cooled motor shell as the research object,the typical casting process of the motor shell using low-pressure sand casting technology was discussed.MAGMASOFT was used to evaluate the feasibility of the process design.The results showed that the motor housing can meet the requirements of related technical conditions. |
| |
| Keywords: | aluminum motor shell low pressure sand casting process design MAGMA simulation |
| 本文献已被 维普 等数据库收录！ |
|
