Influence of superplasticizers on rheological behaviour of fresh cement mortars

To assure required workability of high performance concrete (HPC), various superplasticizers are used. Only by using superplasticizers can rheological properties of HPC mix be adequately adjusted to the methods and conditions of concrete processing. Thus, the key element in efficient workability shaping is the complex knowledge how superplasticizers influence the rheological properties of fresh concrete in different technological circumstances.In the paper, the methodology and test results of an investigation into the influence of chemically different superplasticizers on the rheological properties of standard mortars are presented and discussed. The rheological parameters of mortars yield value g, and plastic viscosity h were determined using VISCOMAT PC rotational rheometer. In the research, the influence of the performance of superplasticizers was investigated taking into account following factors: chemical origin of superplasticizers (SNF/naphthalene sulfonic acid/, AP/polycarboxylate acid, PC/policarboxylate ester/), superplasticizer dosage, W/C ratio, cement type (CEM I, CEM II and CEM III), cement physical and chemical properties and temperature.The results presented in the paper show that by testing rheological parameters of mortars with rotational viscometer, it is possible to complex and precisely determine the performance of superplasticizers. On the ground of obtained results, it is possible to optimise the composition of mortars and concretes from workability point of view.