Improvement of Formability by Oscillation of Internal Pressure in Pulsating Hydroforming of Tube |
| |
Authors: | K. Mori A.U. Patwari S. Maki |
| |
Affiliation: | Department of Production Systems Engineering, Toyohashi University of Technology, Toyohashi, Japan |
| |
Abstract: | A new history of internal pressure in the hydroforming processes of tubes is developed to attain high formability. The effect of improvement of formability by the oscillation of internal pressure in a pulsating hydroforming process of tubes is examined using both finite element simulation and experiment. The deformation behaviour during the hydroforming is greatly affected by the oscillation of internal pressure. For a monotonic history of small internal pressure, the wrinkling was caused by insufficient bulging, whereas the necking and bursting occurred for a monotonic history of large internal pressure. The occurrence of these defects can be avoided by oscillating the internal pressure in the pulsating hydroforming. The improvement of formability in the pulsating hydroforming is due to both low pressure and oscillation of pressure. The effects of the amplitude and cycle number of pressure in the pulsating hydroforming on the deformation behaviour are investigated. It is found the oscillation of internal pressure is effective in preventing the occurrence of defects. |
| |
Keywords: | Tube Finite element method Hydroforming |
本文献已被 ScienceDirect 等数据库收录! |