Corrosion performance of high pressure die-cast Al-6Si-3Ni and Al-6Si-3Ni-2Cu alloys in aqueous NaCl solution |
| |
Authors: | Srinivasan ARTHANARI Jae Cheol JANG Kwang Seon SHIN |
| |
Affiliation: | Research Institute of Advanced Materials, School of Materials Science and Engineering, Seoul National University, Gwanak-gu, Seoul 08826, Korea |
| |
Abstract: | The corrosion performance of high pressure die-cast Al-6Si-3Ni (SN63) and Al-6Si-3Ni-2Cu (SNC632) alloys in 3.5% (mass fraction) NaCl solution was investigated. X-ray diffraction (XRD) and microstructural studies revealed the presence of single phase Si and binary Al3Ni/Al3Ni2 phases along the grain boundary. Besides, the single Cu phase was also identified at the grain boundaries of the SNC632 alloy. Electrochemical corrosion results revealed that, the SNC632 alloy exhibited nobler shift in corrosion potential (?corr), lower corrosion current density (Jcorr) and higher corrosion resistance compared to the SN63 alloy. Equivalent circuit curve fitting analysis of electrochemical impedance spectroscopy (EIS) results revealed the existence of two interfaces between the electrolyte and substrate. The surface layer and charge transfer resistance (Rct) of the SNC632 alloy was higher than that of the SN63 alloy. Immersion corrosion test results also confirmed the lower corrosion rate of the SNC632 alloy and substantiated the electrochemical corrosion results. Cu addition improved the corrosion resistance, which was mainly attributed to the absence of secondary Cu containing intermetallic phases in the SNC632 alloy and Cu presented as single phase. |
| |
Keywords: | die-casting aluminum alloys corrosion polarization electrochemical impedance spectroscopy (EIS) |
本文献已被 ScienceDirect 等数据库收录! |