| 改善方圆坯连铸机钢水可浇性研究 |
| |
| 引用本文： | 陈亮,陈天明,曾建华,冯远超,杨森祥,杨洪波.改善方圆坯连铸机钢水可浇性研究[J].钢铁,2012,47(2):30-33. |
| |
| 作者姓名： | 陈亮 陈天明 曾建华 冯远超 杨森祥 杨洪波 |
| |
| 作者单位： | 1. 攀钢集团研究院有限公司,四川成都,611731
2. 攀钢集团攀枝花钢钒有限公司,四川攀枝花,617062 |
| |
| 摘 要： | 针对攀钢提钒炼钢厂新投产的方圆坯连铸机浇铸铝镇静钢时发生水口堵塞、连浇炉数较低的问题,采取了提高钢水出钢终点w(C])、优化脱氧工艺、促进夹杂物上浮,加强脱钢水扩散脱氧等措施,工业应用表明:中间包钢液中w(Ca])/w(Al])控制在0.05～0.15,w(Ca])/w(S])控制在0.15左右,钢水可浇性得到有效改善,水口堵塞现象得以缓解,单中间包连浇炉数由小于等于5炉提高到8炉。
|
| 关 键 词： | 水口堵塞 脱氧 夹杂物变性 |
Improving Pourability of Molten Steel for Square and Round Billet Continuous Caster |
| |
| CHEN Liang,CHEN Tian-ming,ZENG Jian-hua,FENG Yuan-chao,YANG Seng-xiang,YANG Hong-bo.Improving Pourability of Molten Steel for Square and Round Billet Continuous Caster[J].Iron & Steel,2012,47(2):30-33. |
| |
| Authors: | CHEN Liang CHEN Tian-ming ZENG Jian-hua FENG Yuan-chao YANG Seng-xiang YANG Hong-bo |
| |
| Affiliation: | 1.Pangang Group Research Institute Co.,Ltd.,Chengdu 611731,Sichuan,China; 2.Pangang Group Steel and Vanadium Co.,Ltd.,Panzhihua 617062,Sichuan,China) |
| |
| Abstract: | To solve the problems of nozzle clogging and low continuous casting numbers of the billet and round continuous casting machine in Vanadium Recovery and Steelmaking Plant of Pangang,the steelmaking process was optimized,such as raising the content of carbon in molten steel,optimizing the deoxidation process,promoting the inclusions floatation with effective measures,promoting diffusive deoxidation of molten steel.The industrial practice shows that w(Ca])/w(Al]) in tundish molten steel can be controlled in the range of 0.05-0.15,and w(Ca])/w(S]) can be controlled in 0.15 more or less as well.With these countermeasures,the pourability can be improved obviously.Furthermore,the problem of nozzle clogging can be solved basically,and it can continuously cast 8 heats from below 5 heats in single tundish. |
| |
| Keywords: | nozzle clogging deoxidation inclusion modification |
| 本文献已被 CNKI 万方数据 等数据库收录！ |
|
