| 淋浴喷头大身注射模设计 |
| |
| 引用本文： | 张文玉,向厚淼,申振立. 淋浴喷头大身注射模设计[J]. 模具工业, 2008, 34(10) |
| |
| 作者姓名： | 张文玉 向厚淼 申振立 |
| |
| 作者单位： | 湖南工学院机械工程系,湖南衡阳,421002;东江科技有限公司,广东深圳,518106 |
| |
| 摘 要： | 分析了淋浴喷头大身的工艺特点,介绍了淋浴喷头大身注射模结构设计和工作过程。模具采用斜导柱抽芯机构、齿轮齿条弧形抽芯机构解决了塑件成型问题,用锁扣机构实现了顺序开模,用摆杆先复位机构解决了工作过程中的干涉问题。模具结构紧凑,设计合理。
|
| 关 键 词： | 淋浴喷头大身 注射模 模具结构 |
Design of injection mould for shower nozzle body |
| |
| ZHANG Wen-yu,XIANG Hou-miao,SHEN Zhen-li. Design of injection mould for shower nozzle body[J]. Die & Mould Industry, 2008, 34(10) |
| |
| Authors: | ZHANG Wen-yu XIANG Hou-miao SHEN Zhen-li |
| |
| Abstract: | The technical characteristics of a spray nozzle body were analyzed.The structural design and operating process of an injection mould for the part were presented.Core-pulling mechanisms like angle pin,gear-rack assembly were applied to the forming and demoulding.A lock catch device was used for sequential mould-opening.The use of swing link as pre-resetting mechanism prevent interference between slide blocks and puller pins. |
| |
| Keywords: | shower nozzle body injection mould mould structure |
| 本文献已被 维普 万方数据 等数据库收录！ |
|
