首页 | 本学科首页   官方微博 | 高级检索  
     

独立模式反演算法在激光粒度测试中的应用研究
引用本文:王雪艳,刘缠牢. 独立模式反演算法在激光粒度测试中的应用研究[J]. 激光技术, 2011, 35(3): 352-355,387. DOI: 10.3969/j.issn.1001-3806.2011.03.017
作者姓名:王雪艳  刘缠牢
作者单位:1.西安工业大学 光电工程学院, 西安 710032
摘    要:粒度反演算法是基于米氏散射理论的激光粒度仪的关键技术.针对独立模式迭代反演算法对噪声太敏感,以至于在实际应用中出现粒度测量失真的问题,提出采用5点3次数据平滑算法对其反演进行处理,同时以VISUALC<'++>6.0为开发平台,编写测试软件对算法进行仿真研究,并与粒度真实分布进行了对比.结果表明,特征粒径D<,10>,...

关 键 词:激光物理  粒度测试  粒度反演算法  探测光能误差  数据平滑
收稿时间:2010-07-21

Application of independent model inverse algorithm in laser particle size measurement
WANG Xue-yan,LIU Chan-lao. Application of independent model inverse algorithm in laser particle size measurement[J]. Laser Technology, 2011, 35(3): 352-355,387. DOI: 10.3969/j.issn.1001-3806.2011.03.017
Authors:WANG Xue-yan  LIU Chan-lao
Abstract:Particle size inverse algorithm is the key technology for laser particle size analyzer based on Mie theory. Because the independent model iterative inverse algorithm was so sensitive to noise that it can not be used in actual particle size measurement, five-spot triple smoothing algorithm was proposed to conduct independent model iterative inversion. With VISUAL C++6.0 as development platform, the software was written and simulation was carried out. The simulation result was compared with actual distribution. The distribution error of special particle size D10, D90 was less than 5%, and the distribution error of special particle size D50 was less than 3%. The results show that only the inversion data after smoothing processing can reveal the actual distribution of particle size. The inversion result distortion induced by the optical energy detection error can be overcome. This algorithm can satisfy the requirements of high accuracy, anti-jamming and stability for particle size measurement in modern power industry.
Keywords:
本文献已被 万方数据 等数据库收录!
点击此处可从《激光技术》浏览原始摘要信息
点击此处可从《激光技术》下载免费的PDF全文
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号