| 微型柔性机构的多目标计算机辅助拓扑优化设计 |
| |
| 引用本文： | 左孔天,赵雨东,钟毅芳,陈立平.微型柔性机构的多目标计算机辅助拓扑优化设计[J].计算机辅助设计与图形学学报,2006,18(6):854-859. |
| |
| 作者姓名： | 左孔天 赵雨东 钟毅芳 陈立平 |
| |
| 作者单位： | 1. 清华大学汽车安全与节能国家重点实验室,北京,100084
2. 华中科技大学国家CAD支撑软件工程技术研究中心,武汉,430074 |
| |
| 基金项目： | 中国博士后科学基金;国家重点基础研究发展计划(973计划) |
| |
| 摘 要： | 提出了基于结构整体柔度最小化和结构输出位移最大化的多目标拓扑优化设计方法,建立了微型柔性机构的多目标拓扑优化设计模型.提出了适用于微型柔性机构多目标拓扑优化设计的伴随矩阵敏度分析方法,并将广义收敛移动渐进算法用于多目标多约束微型柔性机构拓扑优化问题的求解.最后通过数值计算验证了优化模型的有效性.
|
| 关 键 词： | 微型柔性机构 多目标 拓扑优化 伴随矩阵分析 优化算法 |
| 收稿时间： | 2005-05-30 |
| 修稿时间： | 2006-01-16 |
Computer-Aided Design of Compliant Micro-mechanism with Multi-objective Topology Optimization |
| |
| Zuo Kongtian,Zhao Yudong,Zhong Yifang,Chen Liping.Computer-Aided Design of Compliant Micro-mechanism with Multi-objective Topology Optimization[J].Journal of Computer-Aided Design & Computer Graphics,2006,18(6):854-859. |
| |
| Authors: | Zuo Kongtian Zhao Yudong Zhong Yifang Chen Liping |
| |
| Affiliation: | State Key Laboratory of Automotive Safety and Energy, Tsinghua University, Beijing 100084;National CAD Support Software Engineering Research Center, Huazhong University of Science and Technology, Wuhan 430074 |
| |
| Abstract: | The proposed optimization method is based on minimizing the structure compliance and maximizing its output displacement, and the corresponding topology optimization model is established. A sensitivity analysis of adjoint method is presented to analyze the topology optimization problems. Meanwhile, the globally convergent version of the method of moving asymptotes (GCMMA) is used in the optimization algorithm. Two numerical examples verified the effectiveness of this approach. |
| |
| Keywords: | compliant micro-mechanism multi-objective topology optimization adjoint method for sensitivity analysis optimization algorithm |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
