| 铝合金和低碳钢的电阻点焊数据特征 |
| |
| 引用本文： | 冀春涛,邓黎鹏.铝合金和低碳钢的电阻点焊数据特征[J].焊接学报,2013,34(3):102-104. |
| |
| 作者姓名： | 冀春涛 邓黎鹏 |
| |
| 作者单位： | 南昌航空大学航空制造工程学院,南昌,330034 |
| |
| 摘 要： | 研究了电阻点焊过程中不同条件下的电极位移和电极压力的数据特征.试验设备为170 W逆变直流点焊机.采用多通道高速数据采集系统采集电极位移和压力数据,用MATLAB进行数据分析,比较了5182铝合金和低碳钢的点焊行为特征.结果表明,当熔核长大到一定程度后,铝合金熔核膨胀速率不会像低碳钢那样达到零值,且电极力会出现一个峰值,该峰值预示着熔核已经达到了足够的尺寸.
|
| 关 键 词： | 电阻焊 电极位移 电极力 熔核尺寸 数据采集 |
| 收稿时间： | 2012/2/10 0:00:00 |
Data characteristics of resistance spot welding of aluminum and mild steel |
| |
| JI Chuntao and DENG Lipeng.Data characteristics of resistance spot welding of aluminum and mild steel[J].Transactions of The China Welding Institution,2013,34(3):102-104. |
| |
| Authors: | JI Chuntao and DENG Lipeng |
| |
| Affiliation: | School of Aeronautical Manufacturing Engineering, Nanchang Hangkong University, Nanchang 330034, China and School of Aeronautical Manufacturing Engineering, Nanchang Hangkong University, Nanchang 330034, China |
| |
| Abstract: | The behaviors of electrode displacement and electrode force during resistance spot welding under various conditions, such as different weld currents and different electrode forces,were investigated in this paper. The welding experiments were conducted with a 170 W MFDC spot welder. Data were collected via a multi-channel high speed data acquisition system, and were analyzed with MATLAB. The behaviors of 5182 aluminum alloy and mild steel in resistance spot welding were compared. The results showed that nugget expansion rate did not reach zero for aluminum alloy but it did for mild steel when the nugget grew to a certain size. An electrode force peak was detected, which indicated that the nugget size was already sufficient. |
| |
| Keywords: | resistance spot welding electrode displacement electrode force nugget size data acquisition |
| 本文献已被 万方数据 等数据库收录！ |
| 点击此处可从《焊接学报》浏览原始摘要信息 |
|
点击此处可从《焊接学报》下载全文 |
|
