Performance analysis and experimental validation of a vee-corrugated absorber integrated collector storage solar water heater |
| |
Authors: | Ayush Kumar Om Prakash |
| |
Affiliation: | Department of Mechanical Engineering, National Institute of Technology Patna, Patna, India |
| |
Abstract: | This paper focuses on enhancing the energy collection efficiency of an integrated collector storage solar water heater (ICS SWH) by vee-corrugating the absorber and optimizing the design for the vee-included angle through simulation and experimental study. This paper presents an efficient algorithm for analyzing a vee-corrugated absorber ICS SWH using Engineering Equation Solver Software. For validating this algorithm, two models of ICS SWH systems have been fabricated: one with a flat absorber and the other with a 60° vee-included angle corrugated absorber with eight corrugations. The basic purpose of the fabrication of the flat absorber ICS SWH system was to approximate the absorptivity of the absorber. A typical value of 0.68 was estimated for the absorptivity of the aluminum absorber coated with nonselective black paint. After the experimental investigation of the 60° vee-included angle ICS SWH system, it was found that the real-time readings were in close agreement with the numerical model readings. For comparison with the previous work, a five-corrugation system with an approximate 90° vee-included angle with the same projected dimensions was modeled and the efficiencies of both the models for the time from 7 a.m. to 3 p.m. were calculated. The efficiency of the eight-corrugation model was 42.56%, which was better than the previous work of the five-corrugation model, with a 38.86% efficiency for the same ambient conditions. Also, it was theoretically deduced that we had an optimized system at 18 corrugations and a vee-included angle of 28.78°. |
| |
Keywords: | experimental investigation integrated collector storage solar water heater numerical modeling optimization vee-corrugated absorber |
|
|