| 基于COM技术的开放式卷板数控系统的研究与开发 |
| |
| 引用本文： | 王金桥,闫祥安,王国栋.基于COM技术的开放式卷板数控系统的研究与开发[J].制造业自动化,2003,25(9):43-45. |
| |
| 作者姓名： | 王金桥 闫祥安 王国栋 |
| |
| 作者单位： | 天津大学机械工程学院,天津,300072 |
| |
| 摘 要： | 分析了基于COM技术的开放式数控系统的特点。将COM技术用于卷板数控系统，使用多轴控制器和工业控制计算机。用模块和组件对它的硬件和软件设计作了详细的论述，完成卷板数控系统实时多任务的要求，使系统具有开放性，并应用于工程实践。
|
| 关 键 词： | 数控卷板机 COM技术 开放式数控系统 组件对象模型 可编程多轴控制器 工业控制计算机 |
| 文章编号： | 1009-0134(2003)09-0043-03 |
| 修稿时间： | 2003年4月11日 |
Research on the open architecture special bending CNC system based on COM |
| |
| WANG Jin-qiao,YAN Xiang-an,WANG Guo-dong
School of Mechanical Engineering,Tianjin University,Tianjin ,China.Research on the open architecture special bending CNC system based on COM[J].Manufacturing Automation,2003,25(9):43-45. |
| |
| Authors: | WANG Jin-qiao YAN Xiang-an WANG Guo-dong
School of Mechanical Engineering Tianjin University Tianjin China |
| |
| Affiliation: | WANG Jin-qiao,YAN Xiang-an,WANG Guo-dong
School of Mechanical Engineering,Tianjin University,Tianjin 300072,China |
| |
| Abstract: | In this paper, the characteristics of an open architecture CNC system based on COM is researched, The paper develops the special bending NC system based on COM . And applies PMAC and industrial PC , describes it hardware and software by modules . The practice proves that the real-time multi-task control of CNC system can be achieved, and tapped CNC system has open using methods and technology. |
| |
| Keywords: | open architecture CNC system COM PMAC industrial PC |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
|
