| PbTe/BiTe分段温差电单偶仿真设计研究 |
| |
| 引用本文： | 任保国,彭磊,张建中.PbTe/BiTe分段温差电单偶仿真设计研究[J].电源技术,2008,32(9). |
| |
| 作者姓名： | 任保国 彭磊 张建中 |
| |
| 作者单位： | 中国电子科技集团公司第十八研究所,天津,300381 |
| |
| 摘 要： | 考虑温差电材料的热电性能参数随温度的变化,建立了分段温差电单偶的优化设计模型.利用商用有限元软件ANSYS分析了PbTe/BiTe分段温差电元件长度比例、元件截面积、接触电阻、冷热面温度等变化对热电转换效率的影响,并进行了敏感度分析.计算结果表明,利用分段温差电单偶能够有效提高温差电池的热电转换效率,用PbTe/BiTe材料组成的分段温差电单偶的理论热电转换效率超过10%.
|
| 关 键 词： | 温差电单偶 分段温差电材料 计算机仿真 |
Study on simulation and design of PbTe/BiTe segmented thermoelectric unicouple |
| |
| REN Bao-guo,PENG Lei,ZHANG Jian-zhong.Study on simulation and design of PbTe/BiTe segmented thermoelectric unicouple[J].Chinese Journal of Power Sources,2008,32(9). |
| |
| Authors: | REN Bao-guo PENG Lei ZHANG Jian-zhong |
| |
| Abstract: | Considering the temperature dependent properties of thermoelectric materials,an optimization designing model of segmented thermoelectric unicouple was made.Utilizing the commercial FEM software ANSYS,the effect of segmented thermoelectric element length ratio,element cross section,contact resistance,cold side and hot side temperature on thermoelectric efficiency was analyzed,and the sensitivity analysis was also performed.The calculation result shows that the conversion efficiency of the thermoelectric generator can be effectively increased,and the theoretical efficiency of segmented thermoelectric unicouple with PbTe/BiTe material is over 10%. |
| |
| Keywords: | thermoelectric unicouple segmented thermoelectric material computer simulation |
| 本文献已被 CNKI 万方数据 等数据库收录！ |
|
