| 用板坯切分法轧制H型钢异型坯的实验研究 |
| |
| 引用本文： | 钱征兵,张利.用板坯切分法轧制H型钢异型坯的实验研究[J].上海金属,1999,21(3):26-28. |
| |
| 作者姓名： | 钱征兵 张利 |
| |
| 作者单位： | 东北大学轧制技术及连轧自动化国家重点实验室 |
| |
| 摘 要： | 以１∶７的模拟比，用板坯切分法对轧制Ｈ型钢异型坯的变形行为进行了实验研究，并简要分析了异型坯的腿部宽展与来料厚度、宽度、轧辊直径、楔高、楔角以及压下量的关系
|
| 关 键 词： | 连铸板坯 切分轧制 H型钢 异型坯 |
EXPERIMENTAL STUDY OF SLAB SPLIT ROLLINGFOR H-BEAM BLANK PRODUCTION |
| |
| Qian,ZhengbingZhang,LiLiu,XianghuaWang,Gudong.EXPERIMENTAL STUDY OF SLAB SPLIT ROLLINGFOR H-BEAM BLANK PRODUCTION[J].Shanghai Metals,1999,21(3):26-28. |
| |
| Authors: | Qian ZhengbingZhang LiLiu XianghuaWang Gudong |
| |
| Affiliation: | Northeastern University |
| |
| Abstract: | The
steel samples scaled in 17 were used to simulate the deformation behavior of H-beam
blank during rolling process by slab split rolling.The decreasing ratio of flange width was
analyzed in connection with the thickness and width of the slab,the roll diameter,height
and angle of belly and reduction amount. |
| |
| Keywords: | Continuous Cast Slab Split Rolling H-beam BeamBlank |
| 本文献已被 CNKI 维普 等数据库收录！ |
