| 高速铣削硬态40CrNiMoA的试验研究 |
| |
| 引用本文： | 查文炜. 高速铣削硬态40CrNiMoA的试验研究[J]. 制造技术与机床, 2006, 0(11): 30-32 |
| |
| 作者姓名： | 查文炜 |
| |
| 作者单位： | 盐城工学院,江苏,盐城,224003 |
| |
| 摘 要： | 针对硬态40CrNiMoA（47HRC），在干切和空气油雾环境下，选用黛杰整体硬质合金（K30）涂层（涂层材料为TiAIN）立铣刀在Mikron UCP710高速加工中心上作了试验研究。并通过试验结果对两种铣削环境下的铣削力作了比较，得出不同铣削参数和铣削环境下高速铣削硬态40CrNiMoA（47HRC）铣削力的变化规律。
|
| 关 键 词： | 高速铣削 铣削力 硬态40CrNiMoA |
| 收稿时间： | 2006-07-31 |
| 修稿时间： | 2006-07-31 |
Experimental Study on HSM 40CrNiMoA |
| |
| ZHA Wenwei. Experimental Study on HSM 40CrNiMoA[J]. Manufacturing Technology & Machine Tool, 2006, 0(11): 30-32 |
| |
| Authors: | ZHA Wenwei |
| |
| Affiliation: | Yancheng Institute of Technology, Yancheng 224003 , CHN |
| |
| Abstract: | The present paper gives details of machining experiments with the hardened 40CrNiMoA(HRC47)steel under different cutting states(dry and coolant option) using flat end solid K30 carbide cutter (coated with TiAlN).The aim was to identify cutting force and cutting parameters. The analysis on the experimental data shows the cutting force change rule along with the cutting parameters. |
| |
| Keywords: | High Speed Milling Cutting Force Hardened 40CrNiMoA |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
