| 隔热条的轴钉应力开裂试验方法 |
| |
| 引用本文： | 纪红,崔佳,李永丰,刘淑凤,王书明.隔热条的轴钉应力开裂试验方法[J].理化检验(物理分册),2013(3):168-170. |
| |
| 作者姓名： | 纪红 崔佳 李永丰 刘淑凤 王书明 |
| |
| 作者单位： | [1]北京有色金属研究总院分析测试技术研究所,北京100088 [2]有研亿金新材料股份有限公司,北京102200 |
| |
| 摘 要： | 隔热条是隔热铝合金建筑型材的关键部件,可用轴钉应力试验考察其在加工和使用过程中的适应性,选用切削液-清洗液联合浸泡法和清洗液浸泡法两种方法对隔热条进行了轴钉应力测试,并对比了方法的不同。结果显示:试样均未出现开裂现象,表明新版标准GB 5237.6-2012中规定使用更严格的方法(GB/T 23615.1-2009中规定的方法)来考察隔热条的耐轴钉应力开裂性是可行的。
|
| 关 键 词： | 隔热条 应力开裂 试验方法 标准 |
Stress Cracking Test Methods of Axis Pin for Thermal Barrier Strip |
| |
| JI Hong,CUI Jia,LI Yong-feng,LIU Shu-feng,WANG Shu-ming.Stress Cracking Test Methods of Axis Pin for Thermal Barrier Strip[J].Physical Testing and Chemical Analysis Part A:Physical Testing,2013(3):168-170. |
| |
| Authors: | JI Hong CUI Jia LI Yong-feng LIU Shu-feng WANG Shu-ming |
| |
| Affiliation: | 1.Center for Analytical Technology,General Research Institute for Non-ferrous Metals,Beijing 100088,China; 2.GRIKIN Advanced Materials Co.,Ltd.,Beijing 102200,China) |
| |
| Abstract: | Thermal barrier strip was the key component of the thermal barrier aluminium alloy architecture profiles.The adaptability of thermal barrier strip in the course of process and using could be tested by pin stress cracking test.The cutting fluid-cleaning solution immersion method and the cleaning solution immersion method were selected to test the axis pin stress cracking properties,and the differences between the two methods were compared.The results indicated that no cracking were found in the samples.Though the test conditions in GB /T 23615.1-2009 were stricter,the samples could reach the requirement of the new standard GB 5237.6-2012. |
| |
| Keywords: | thermal barrier strip stress cracking test method standard |
| 本文献已被 CNKI 维普 等数据库收录！ |
|
