| 环焊缝含不同心缺陷压力管道的极限载荷分析 |
| |
| 引用本文： | 王妍,钱才富,司俊,顾福明,张亚余,罗晓明. 环焊缝含不同心缺陷压力管道的极限载荷分析[J]. 化工设备与管道, 2011, 0(4): 46-48 |
| |
| 作者姓名： | 王妍 钱才富 司俊 顾福明 张亚余 罗晓明 |
| |
| 作者单位： | 1. 北京化工大学机电工程学院,北京,100029
2. 上海市特种设备监督检验技术研究院,上海,200062 |
| |
| 摘 要： | 针对环焊缝含不同心缺陷的压力管道,建立有限元模型,计算管道的极限载荷.在有限元计算结果的基础上,将极限载荷拟合为管道直径、壁厚及缺陷大小的函数.数值验算表明,拟合关系公式在管径从500 ～ 900 mm,壁厚从6～10 mm,不同心量从1°～10°范围内具有很高的精确度.
|
| 关 键 词： | 压力管道 环焊缝 不同心度缺陷 极限载荷 |
Analysis of Limit Load of Pressure Piping with Misalignment Defect in Circumferential Weld |
| |
| WANG Yan,QIAN Cai-fu,SI Jun,GU Fu-ming,ZHANG Ya-yu,LUO Xiao-ming. Analysis of Limit Load of Pressure Piping with Misalignment Defect in Circumferential Weld[J]. Process Equipment & Piping, 2011, 0(4): 46-48 |
| |
| Authors: | WANG Yan QIAN Cai-fu SI Jun GU Fu-ming ZHANG Ya-yu LUO Xiao-ming |
| |
| Affiliation: | WANG Yan1,QIAN Cai-fu1,SI Jun2,GU Fu-ming2,ZHANG Ya-yu2,LUO Xiao-ming2(1.College of Mechanical and Electrical Engineering,Beijing University of Chemical Technology,Beijing 100029,China,2.Shanghai Special Equipment Supervision and Inspection Technology Research Institute,Shanghai 200062,China) |
| |
| Abstract: | In this article,the finite element model was established for the pressure piping with misalignment defect and the limit load for this piping was calculated.On the basis of the results from finite element method,the equation to calculate limit load was created from the regression with the variables of diameter of piping,thickness of piping and misalignment size.The regression equation is quite precise within the scope of 500~900 mm in diameter,6~10 mm in thickness and 1°~10°in misalignment. |
| |
| Keywords: | pressure piping hoop weld defect of misalignment limit load |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
|
