| 用刚塑性有限元法求解二辊轧管时轧制压力 |
| |
| 引用本文： | 贾爱红,王邦文,王宝同.用刚塑性有限元法求解二辊轧管时轧制压力[J].冶金设备,2006(1):12-14,26. |
| |
| 作者姓名： | 贾爱红 王邦文 王宝同 |
| |
| 作者单位： | 北京科技大学,北京,100083 |
| |
| 摘 要： | 根据二辊斜轧穿孔变形的特点,对变形区进行了适当的简化,并建立了几何模型,在应用刚塑性有限元法对其稳态轧制变形区的力学特性进行分析基础上,建立了斜轧穿孔过程的泛函、初始速度场,处理了边界条件,求解了轧制压力,并且得到了较高的精度。
|
| 关 键 词： | 斜轧穿孔 轧制压力 刚塑性有限元 |
| 修稿时间： | 2005年7月23日 |
Using the Method of Regid- Plastic Finite Element to Calculate the Rollingforce of Two- Cross Roll Piercing |
| |
| Jia Aihong,Wang Bangwen,Wang Baotong.Using the Method of Regid- Plastic Finite Element to Calculate the Rollingforce of Two- Cross Roll Piercing[J].Metallurgical Equipment,2006(1):12-14,26. |
| |
| Authors: | Jia Aihong Wang Bangwen Wang Baotong |
| |
| Abstract: | Based on the deformed trait of two-cross roll piercing,the deformed zone is approprately simplified and geomitrical model is established.Based on analysing the mechanical properties of deformed zone during the steady rolling,the roll piercing function and original velocity-field are established.Boundary condition is handled.Rolling force is calculated and higher accuracy is obtained. |
| |
| Keywords: | Roll piercing Rolling force Regid-plastic finite element |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
|
