| 铝合金气门盖压铸模设计 |
| |
| 引用本文： | 黄汉云,刘新,陈洪前.铝合金气门盖压铸模设计[J].铸造技术,2005,26(7):609-610. |
| |
| 作者姓名： | 黄汉云 刘新 陈洪前 |
| |
| 作者单位： | 1. 湖南株洲工学院,湖南,株洲,412008
2. 湖南长沙新阳光铝液有限公司,湖南,长沙,410000 |
| |
| 摘 要： | 根据铝合金气门盖压铸件的结构复杂(四周壁薄、侧向有通孔,型腔内凹而不规则,两条交叉筋通过其中带孔的凸台)的特点及严格的技术要求,选择了116D型压铸机,将分型面选择在动、定模套板的结合面处.浇注系统采用侧浇口,模具结构采用一模一腔.经生产实践证明达到产品的各项技术要求.
|
| 关 键 词： | 铝合金 气门盖 压铸机 模具结构 |
| 文章编号： | 1000-8365(2005)07-0609-02 |
| 修稿时间： | 2005年4月26日 |
Design of Die-Casting Mold of Aluminium Pnystega |
| |
| HUANG Han-yun,LIU Xin,CHEN Hong-qian.Design of Die-Casting Mold of Aluminium Pnystega[J].Foundry Technology,2005,26(7):609-610. |
| |
| Authors: | HUANG Han-yun LIU Xin CHEN Hong-qian |
| |
| Abstract: | According to the complicated point (around thin wall and side-direction have got through-holes, impression cove but rule, two slip cross tendon through the boss of the cast-ding) of the aluminium pnystega die-casting and the strict specification, selected the 116D type pressure die casting machine, the parting plane was select on the joint line of the stir and cover die lag . runner system adopted the side runner,dying structure adopted one module one cavity. The production practice provened that it reach each term specification of the product. |
| |
| Keywords: | Casting process Pouring system Die-casting machine Mold structure |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
|
