| POLYFLOW逆向挤出功能在挤出方型物口模设计中的应用 |
| |
| 引用本文： | 杨佳黎,黄兴元,蒋发梅. POLYFLOW逆向挤出功能在挤出方型物口模设计中的应用[J]. 南昌大学学报(工科版), 2010, 32(4): 326-330 |
| |
| 作者姓名： | 杨佳黎 黄兴元 蒋发梅 |
| |
| 作者单位： | 南昌大学机电工程学院,江西南昌330031 |
| |
| 基金项目： | 国家自然科学基金资助项目，江西省自然科学基金资助项目 |
| |
| 摘 要： | 以方型材挤出口模设计为例,建立了几何模型、数学模型及有限元模型。通过在POLYFLOW模拟软件中构建任务并定义各项参数,利用重新生成网格技术,进行了数值模拟和分析,得出如何有效应用POLYFLOW逆向挤出功能对方型材挤出口模进行设计。研究表明:POLYFLOW逆向挤出功能可以提前预测其变形倾向,提高了口模设计一次性成功率,缩短口模的开发周期,降低成本。
|
| 关 键 词： | POLYFLOW软件 逆向挤出 口模设计 数值模拟 |
Applications of Polyflow Inverse Extrusion Method in the Design of Square-Shaped Plastics Profile Extrusion Die |
| |
| YANG Jia-li,HUANG Xing-yuan,JIANG Fa-mei. Applications of Polyflow Inverse Extrusion Method in the Design of Square-Shaped Plastics Profile Extrusion Die[J]. Journal of Nanchang University(Engineering & Technology Edition), 2010, 32(4): 326-330 |
| |
| Authors: | YANG Jia-li HUANG Xing-yuan JIANG Fa-mei |
| |
| Affiliation: | (School of Mechanical and Electrical Engineering,Nanchang University,Nanchang 330031,China) |
| |
| Abstract: | The die of square-shaped plastics profile being taken as an example,the geometry,mathematic and finite element model were established,and numerical simulation and analysis were performed.Besides,how to effectively apply the function of POLYFLOW inverse extrusion to design the square-shaped plastics profile extrusion die was discussed.The research indicated：the function of POLYFLOW inverse extrusion can forecast its distortion tendency ahead of time and enhance the success ratio to design the disposable profile extrusion die.It reduces the design cycle time and the cost of development. |
| |
| Keywords: | POLYFLOW software inverse extrusion die design numerical simulation |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
