| 带冠整体叶轮通道间数控电解加工方法研究 |
| |
| 引用本文： | 胡平旺,徐家文,云乃彰. 带冠整体叶轮通道间数控电解加工方法研究[J]. 电加工与模具, 2003, 0(1): 31-33 |
| |
| 作者姓名： | 胡平旺 徐家文 云乃彰 |
| |
| 作者单位： | 1. 汽车管理学院网络中心,安徽蚌埠,233011
2. 南京航空航天大学机电工程学院,江苏南京,210016 |
| |
| 摘 要： | 带冠整体叶轮是整体叶轮结构设计的发展方向之一。本文在分析处理带冠整体叶轮型面数据的基础上。研究展成电解加工带冠整体叶轮成形规律。计算叶轮加工轨迹，依据计算机仿真对加工轨迹和工具阴极的形状进行设计和修正。结合工艺试验。完善带冠整体叶轮数控展成电解工艺。加工出符合要求的带冠整体叶轮试件。
|
| 关 键 词： | 数控加工 发动机 带冠整体叶轮 电解加工 成形规律 |
| 修稿时间： | 2002-10-14 |
The study on NC Electrochemical Contour Evolution Machining the tunnel of the cowled integral impeller |
| |
| Hu Pingwang,et al.. The study on NC Electrochemical Contour Evolution Machining the tunnel of the cowled integral impeller[J]. Electromachining & Mould, 2003, 0(1): 31-33 |
| |
| Authors: | Hu Pingwang et al. |
| |
| Abstract: | The style of the cowled integral impeller is one of the tendency to design the integral impeller. On the basis of the study on processing the data that depict the blade surface of the cowled integral impeller and the shaping law to process the cowled integral impeller with ECCEM, so that the tool path in the process was obtained. Then the shape of the tool cathode and its path were adjust according to the simulation of the computer. The technique to process the cowled integral impeller with NC ECCEM was achieved through many technical experiments and the trial production satisfied with technical demand was processed. |
| |
| Keywords: | cowled integral impeller ECM shaping law |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
