| Vib Pro使用VCA做启动零时校准的几个问题 |
| |
| 引用本文： | 杨伟,刘志刚,李丽梅.Vib Pro使用VCA做启动零时校准的几个问题[J].物探装备,2014,24(4):267-272. |
| |
| 作者姓名： | 杨伟 刘志刚 李丽梅 |
| |
| 作者单位： | 东方地球物理公司装备服务处震源服务中心,河北涿州,072750 |
| |
| 摘 要： | 本文着重介绍可控震源Vib Pro控制系统使用VCA做启动零时校准时,使用VCA当选用的不同采集通道以及不同的采样率时,其测试结果有很大区别。本文通过几组典型试验来分析其中的原因,规范Vib Pro控制系统使用VCA做启动零时校准的方法,以提高物探施工的质量。
|
| 关 键 词： | VibPro VCA 启动零时校准 可控震源 |
Several issues for VIBPRO use the VCA to start zero calibration |
| |
| Yang Wei,Liu Zhigang,Li Limei.Several issues for VIBPRO use the VCA to start zero calibration[J].Equipment for Geophysical Prospecting,2014,24(4):267-272. |
| |
| Authors: | Yang Wei Liu Zhigang Li Limei |
| |
| Abstract: | This article focuses on Vibrator VIBPRO control system using the VCA to do the zero time calibration. When adopt different channels and different sampling rates, test results are very different. Through several sets of typical experimental analysis of the reasons, this paper introduces how to standardize the application of VCA for VIBPRO to do the zero time, then to improve the quality of seismic acquisition. |
| |
| Keywords: | VIBPRO VCA zero time vibrator |
| 本文献已被 CNKI 维普 等数据库收录！ |
|
