基于FLUENT的辅喷嘴气流流场数值模拟 |
| |
引用本文: | 吴重敏,陈革,沈军,罗军.基于FLUENT的辅喷嘴气流流场数值模拟[J].纺织学报,2010,31(8):122-124. |
| |
作者姓名: | 吴重敏 陈革 沈军 罗军 |
| |
作者单位: | 东华大学 |
| |
摘 要: | 利用Fluent对4种不同孔型的辅助喷嘴进行了模拟求解,得出了湍流状态下辅助喷嘴管内流体的速度场,从微观上分析了辅助喷嘴内部的气体流动情况。对比分析了喷孔形状对辅助喷嘴喷出气流效果的影响。数值计算结果表明,在相同供气压力下四种孔型的辅助喷嘴气流射出能力依次为:7圆孔型>矩形孔型>双圆孔型>单圆孔型。与实验结果进行比较发现,数值模拟具有很高的可靠性。
|
关 键 词: | 辅助喷嘴 喷孔形状 FLUENT 数值模拟 喷气织机 |
收稿时间: | 2009-07-23; |
Analysis of assistant nozzle with different orifice-form of air-jet loom based on FLUENT |
| |
Abstract: | Simulation solutions to assistant nozzle with four orifice-form was done based on Fluent.The flow field velocity in the state of turbulence were obtained, and the inside flow field of assistant nozzle is microcosmically described.Influence of the orifice-form to the ejecting flow field was analyzed.According to the result of numerical calculation,supplied with the same air-pressure,the ejecting capacity of four orifice-form assistant nozzle took turns7 circular orifice > rectangular orifice > circular twin-orifice > single circular orifice.Compared with the experiment result,it was proven that the numerical simulation has a high reliability. |
| |
Keywords: | |
|
| 点击此处可从《纺织学报》浏览原始摘要信息 |
|
点击此处可从《纺织学报》下载全文 |