The role of lubrication and corrosion in abrasion of materials in aqueous environments

A rubber wheel type test apparatus has been constructed which allows abrasion testing to be conducted in slurry or dry environments in otherwise identical conditions. Abrasion tests of a steel, a sintered tungsten carbide–cobalt hardmetal and an HVOF sprayed nickel chrome–chromium carbide cermet coating have been performed in dry and aqueous slurry conditions, the latter with both neutral and acidic carriers. It has been shown that the aqueous carrier acts as an effective lubricant and thus significantly reduces the abrasion rate over that observed in dry conditions. However, enhancement of corrosion by use of an acid slurry lead to an increase in the rate of material removal over that of the neutral aqueous conditions in all cases. Increases were small for the corrosion resistant cermet coating and moderate for the steel. Significant enhancement of wear was observed for the sintered WC–Co hardmetal where rapid removal of the cobalt binder by the acid resulted in a change in dominant mechanism of carbide removal from attritive wear to pullout.