|
|||||
|
|
| 用数学模型计算直廓环面蜗杆轴截面齿形 | |
| 引用本文： | 张焕,刘媛,张新州.用数学模型计算直廓环面蜗杆轴截面齿形[J].信息工程大学学报,2000,1(1):75-77. |
| 作者姓名： | 张焕 刘媛 张新州 |
| 作者单位： | 1. 郑州牧专,郑州 450002 2. 信息工程大学信息安全学院,郑州 450002 3. 郑州粮院,郑州 450052 |
| 摘 要： | 应工厂要求,结合工厂现行工艺,提出了直廓环面蜗杆淬火后用小圆柱面砂轮磨削的新方法,建立了相应的数学模型,并用计算机绘制出用这种新方法磨削后蜗杆的轴截面齿形,所得结果符合工厂实际,从理论上证明了这种新磨削方法的可靠性. |
| 关 键 词： | 直廓环面蜗杆 磨削 截形 数学模型 |
| 修稿时间： | 1999年4月19日 |
The Calculation of the Shaft Cross-section Teeth of the Hourglass Worm Gear by Means of a Mathematical Model |
|
| ZHANG Huan,LIU Yuan,ZHANG Xin,zhou.The Calculation of the Shaft Cross-section Teeth of the Hourglass Worm Gear by Means of a Mathematical Model[J].Journal of Information Engineering University,2000,1(1):75-77. | |
| Authors: | ZHANG Huan LIU Yuan ZHANG Xin zhou |
| Affiliation: | ZHANG Huan LIU Yuan ZHANG Xin zhou |
| Abstract: | Based on the requirement of the factory and an analysis of its present technology in production,this paper puts forward a new way to use a small cylindrical faced grinding wheel to grind the hourglass worm geaz after it has been quenched.A mathematical model is established and the computer is used to draw the profile of the ground hourglass worm wheel teeth.The result shows that it can meet the requirement of the factory and proves in theory its reliability. |
| Keywords: | hourglass worm gear grinding cross section mathematical model |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ | |
| 点击此处可从《信息工程大学学报》浏览原始摘要信息 | |
| 点击此处可从《信息工程大学学报》下载全文 | |